Theƙugiya irin harbi ayukan iska mai ƙarfi injigabaɗaya yana da babban bayyanar, kuma tsarin shigarwa yana da rikitarwa fiye da na ƙananan kayan aiki. Daidaita daidai da injin gwaji sune mabuɗin don tabbatar da aikin al'ada na kayan aiki na gaba. Game da ayyukan farko na rashin ƙwarewa, ana buƙatar masu amfani da su bi umarnin ma'aikatan da suka dace ko koma zuwa umarnin. Yin aiki mara izini na iya haifar da lalacewar da ba za a iya juyawa baƙugiya harbi ayukan iska mai ƙarfi inji. Theshot blasting machine manufacturer has sorted out the precautions for installation and test machine to share with you. I hope it will be helpful to users who use the device for the first time.
1. Installation. Theƙugiya irin harbi ayukan iska mai ƙarfi inji is installed and debugged in the production plant and disassembled into several parts before being transported to the user site for installation. Although there is no pit, the foundation must be firm, the anchor bolt holes must be standardized, and the chamber body must be adjusted. After the second irrigation, the anchor bolt nuts can be tightened after solidification. After the chamber body is fixed, the various parts can be installed. Theprecautions for the installation and debugging of the relevant components are introduced below.
1. Na'urar harbi mai fashewa:
Theshot blasting device has been installed on the chamber body before leaving the factory. Please pay attention to the problems to be debugged before use. Check whether the fixed positions of the blade, the pill wheel, the directional sleeve, and the guard plate are accurate and firm, and check whether the direction of rotation is correct after power on. Then adjust the position of the directional sleeve opening. Theoretically, the angle between the front edge of the directional opening and the front edge of the blade throwing position is about 900. After fixing the position of the directional sleeve, the position of the projectile belt can be detected by hanging Place a steel plate or wooden board on the position of the workpiece facing the exit of the shot blasting machine, start the shot blasting machine, put a small amount (2-5kg) of projectiles into the blasting tube, and then stop, check whether the hit position on the steel plate is suitable for the needs, such as Close the window of the bias-adjustable directional sleeve downwards, and vice versa, until it fits, and note the position of the directional sleeve opening as a basis for future replacement of the directional sleeve.
2. Hoist da dunƙule na'ura mai:
Da farko yi gwajin rashin kaya don duba ko guga mai ɗagawa da ruwan karkace suna gudana a madaidaiciyar hanya, sannan a ɗaure bel ɗin hawan zuwa matsakaicin matsakaicin tashin hankali don gujewa karkacewa, sannan gudanar da gwajin kaya don dubawa aiki da isar da isar, ko akwai wani hayaniyar hayaniya da rawar jiki, bincika da cire cikas.
3. Mai raba kwaya-yashi:
Da farko duba ko motsi na ragon yana da sassauƙa, sannan a duba madaidaicin madaidaicin farantin raba, sannan lokacin da aka ɗora da ɗora shi, ana ci gaba da shigowa da harbin ƙarfe, sannan a duba ko harbin ƙarfe yana fita yana fadowa lokacin da aka cire murfin